Loading
0%
Portfolio
A modular 900×900 mm panel system developed as the base for a configurable cat climbing wall. The main panel defines the fixing grid, rear clip mounting and optional LED-ready setup, while shelves, scratching posts, a house, a bridge and a climbing rope work as accessories attached to the same platform.
Project narrative
Discover curated frames from this project.
The project focused on a modular cat climbing wall built around a primary base panel sized at 900 × 900 mm. That main panel is the core product in the system, while every other element was designed as an...
The base panel is made from 18 mm laminated board with a net size of 898 × 898 mm and finished with 1 mm ABS edging. The front uses a regular grid prepared for M6 threaded inserts, while the rear side is...
The documentation also defines an optional LED-ready feature on the back of the panel together with quality checks for insert and clip positioning. This makes the module more than a simple board: it...
Around this core panel, the project introduces a full accessory family: an MDF cat house with a 350 × 400 × 450 mm body, short and long shelves sized 300 × 150 mm and 600 × 150 mm, a drawbridge made from...
Core product
The project focused on a modular cat climbing wall built around a primary base panel sized at 900 × 900 mm. That main panel is the core product in the system, while every other element was designed as an accessory mounted onto the same fixing logic.
Mounting logic
The base panel is made from 18 mm laminated board with a net size of 898 × 898 mm and finished with 1 mm ABS edging. The front uses a regular grid prepared for M6 threaded inserts, while the rear side is designed for Cliff clips, allowing the panel to...
Accessory family
The documentation also defines an optional LED-ready feature on the back of the panel together with quality checks for insert and clip positioning. This makes the module more than a simple board: it becomes a structured platform prepared for further...
Result
Around this core panel, the project introduces a full accessory family: an MDF cat house with a 350 × 400 × 450 mm body, short and long shelves sized 300 × 150 mm and 600 × 150 mm, a drawbridge made from seven slats on sisal rope, a Ø30 mm climbing rope,...
